End brush crimped PBU dia. 10 mm shank dia. 6 mm SiC filament dia. 0.90 grit 180

Contact Us +33 3 88 49 72 50 info@pferd.fr

Technical information

End brush crimped PBU dia. 10 mm shank dia. 6 mm SiC filament dia. 0.90 grit 180

Dia. cup: 10 mm
Dia. external: 10 mm
Dia. filament material: 0.9 mm
Dia. shank: 6 mm
Filament material: Silicon carbide (SiC)
Grit size: 180
Length, filament: 20 mm
Length, total: 65 mm
Max. RPM: 20000 RPM
Mounting system: Shank
Packaging: Industrial packaging
RPM, optimum, from: 8000 RPM
RPM, optimum, to: 13000 RPM
Packaging unit: 10 pieces

Description

Suitable for light brushing such as deburring, cleaning and derusting.

Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement.

Plastic filament withstands temperatures up to 220 °C.

Advantages

Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.
Use coolant for applications where large amounts of heat are produced.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Drive spindle; Flexible shaft drive; Power drill; Straight grinder

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 8/170 RS

Robot spindles for stationary application PGAS 8/170 RS PGAS 8/170 RS

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.