End brush crimped PBU dia. 15 mm shank dia. 6 mm brass wire dia. 0.30

Technical information

Dia. cup: 16 mm
Dia. external: 15 mm
Dia. filament material: 0.3 mm
Dia. shank: 6 mm
Filament material: Brass wire (MES)
Length, filament: 22 mm
Length, total: 65 mm
Max. RPM: 18000 RPM
Mounting system: Shank
Packaging: Industrial packaging
RPM, optimum, from: 7200 RPM
RPM, optimum, to: 11700 RPM
Packaging unit: 10 pieces

Description

Suitable for light brushing such as deburring, cleaning and derusting.

Brushes with brass wire filament material are suitable for particular applications such as surface finishing on workpieces made from copper and brass. In comparison to steel wire, brass wire is softer and more flexible. For all brushes with brass wire, PFERD uses wire quality CuZn37.

Brass wire withstands temperatures up to 180 °C.

Advantages

Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation.
Non-sparking.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Brass; Copper; Other non-ferrous metals; Zinc

Applications: Cleaning; Deburring; Removing oxide layers

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

End brushes crimped shank-mounted

End brush crimped PBU dia. 15 mm shank dia. 6 mm brass wire dia. 0.30

PFERD Newsletter subscription