Diamond hand pads 55x90mm grit D76 fine for hard materials

Technical information

Abrasive: Diamond
Grit size: 76
Length: 90 mm
Width: 55 mm
Packaging unit: 1 piece

Description

Exceptionally suitable for work on wear-resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc. Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.

Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.

Grit size according to ISO 6344: 220

Special features

Highly flexible, enabling optimal adjustment to the contour.
Hard-to-reach areas can be accessed.
Can be used for wet and dry grinding.

Recommendations for use

Work with little contact pressure.

Ordering notes

The grit sizes are specified in ?m.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Stone; Thermoplastics; Titanium; Titanium alloys

Applications: Cleaning; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work

Drive types: Manual application

Downloads

Hand pad diamond version

Diamond hand pads 55x90mm grit D76 fine for hard materials

HP 5590 DIA 76

PFERD TOOLS Newsletter subscription