HSS rotary cutters, cut 3, tree shape with radius end H

HSS rotary cutter tree shape H dia. 16x30 mm shank dia. 6 mm Z 3 universal medium fine chip breaker

HSS H 1630/6 Z3

Item number:: 22434536
EAN:: 4007220059364

HSS rotary cutter tree shape H dia. 16x30 mm shank dia. 6 mm Z 3 universal medium fine chip breaker 1

HSS rotary cutter tree shape H dia. 16x30 mm shank dia. 6 mm Z 3 universal medium fine chip breaker 2

Technical data Change variant

Retailers-Search

Choose options

Dia. external

8 mm 10 mm 12 mm 16 mm

Length, cut

20 mm 25 mm 30 mm

Reset Filter

Technical information

HSS rotary cutter tree shape H dia. 16x30 mm shank dia. 6 mm Z 3 universal medium fine chip breaker

Cut: 3
Dia. external: 16 mm
Dia. shank: 6 mm
Length, cut: 30 mm
Length, total: 70 mm
Radius corner design: 3.6 mm
Packaging unit: 1 piece

Description

Cut 3 has chip breakers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.

Tree-shaped burr with radius end.

Advantages

Highly aggressive.
Can be used at low rotational speeds.
Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Grey/nodular cast iron (GG/GJL, GGG/GJS); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/24 RS PGAS 4/24 RS

HSS rotary cutters, cut 3, tree shape with radius end H

HSS rotary cutter tree shape H dia. 16x30 mm shank dia. 6 mm Z 3 universal medium fine chip breaker

HSS H 1630/6 Z3

Matching tool drive

PFERD Newsletter subscription