HSSE step drill Co5

Step drill HSSE Co5 14 drilling steps dia. 4-30 mm 3-surface shaft dia. 10 mm

STB HSSE 4-30/10

Item number:: 25204074
EAN:: 4007220571668

Step drill HSSE Co5 14 drilling steps dia. 4-30 mm 3-surface shaft dia. 10 mm 1

Technical data Change variant

Retailers-Search

Technical information

Step drill HSSE Co5 14 drilling steps dia. 4-30 mm 3-surface shaft dia. 10 mm

Dia. shank: 10 mm
Drill bit dia. range: 4 - 30 mm
Drill steps: 4.0/6.0/8.0/10.0/12.0/14.0/16.0/18.0/20.0/22.0/24.0/26.0/28.0/30.0
Length, total: 100 mm
Number, drill steps: 14 pcs.
RPM, harte NE-Metalle: 200 - 2.400 RPM
RPM, rust and acid-resistant steels: 100 - 1.600 RPM
RPM, soft non-ferrous metals: 200 - 2.400 RPM
RPM, steels up to 700 N/mm²: 200 - 2.400 RPM
RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP): 100 - 1.600 RPM
Version: HSS
Packaging unit: 1 piece

Description

HSSE step drill for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft.

Advantages

Long tool life and temperature resistance due to Co content.
Drilling and deburring in a single step.
Completely smooth running and a high cutting performance.
The high-quality drill tip ensures effortless centring and drilling.
The tool taper makes it easier to pull back from drilled plates.
Chips which do not break are neatly removed as with a spiral drill.
Built-up edges and cold welding on the blades are prevented.

Recommendations for use

Use HSSE step drills on sheets, pipes and profiles with a maximum thickness of 4 mm.
Use cutting oil/compressed air as a coolant and lubricant in the case of step drills without a coating.

Safety notes

To ensure reliable torque transmission, step drills have a three-surface shaft.

Materials that can be worked: Aluminium; Brass; Bronze; Case-hardened steels; Chipboard; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Steel; Steel, cast steel; Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; Wood; Zinc

Applications: Countersinking; Deburring; Drilling

Drive types: Column drill; Power drill

Downloads

brochure-drilling-and-countersink-tools-2022-web-en.pdf

HSSE step drill Co5

Step drill HSSE Co5 14 drilling steps dia. 4-30 mm 3-surface shaft dia. 10 mm

STB HSSE 4-30/10

PFERD TOOLS Newsletter subscription