Tungsten carbide copy milling burrs, cut MICRO, inverted cones WKN without end cut

Tungsten carbide copy milling burr 7 mm MICRO inverted cone WKN dia. 08x26 mm shank dia. 6 mm finishing

WKN 0826/6 MICRO 7mm KFS

Item number:: 21155008
EAN:: 4007220244937

Tungsten carbide copy milling burr 7 mm MICRO inverted cone WKN dia. 08x26 mm shank dia. 6 mm finishing 1

Technical data

Retailers-Search

Technical information

Tungsten carbide copy milling burr 7 mm MICRO inverted cone WKN dia. 08x26 mm shank dia. 6 mm finishing

Angle: 4 °
Cut: MICRO
Dia. external: 8 mm
Dia. shank: 6 mm
Length, construction: 7 mm
Length, cut: 26 mm
Length, total: 73 mm
RPM, grey cast iron, white cast iron: 24.000 - 30.000 RPM
RPM, hard non-ferrous metals: 18.000 - 24.000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 18.000 - 24.000 RPM
RPM, high-temperature-resistant materials: 18.000 - 24.000 RPM
RPM, rust and acid-resistant steels: 18.000 - 24.000 RPM
RPM, steels up to 1,200 N/mm²: 24.000 - 30.000 RPM
Packaging unit: 1 piece

Description

Tungsten carbide copy milling burrs by PFERD TOOLS are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould-making.

Tungsten carbide copy milling burrs with MICRO cut were designed especially for fine stock removal, and produce a high surface quality. Almost all materials up to a hardness of 68 HRC can be machined.

Inverted cone-shaped rotary cutter, tapered towards the shank. Inverted cones WKN are especially well-suited to processing punching tools that are used for processing aluminium.

Advantages

Long tool life and high surface quality.
The uncut area provides optimum contour guidance and protects the workpiece against damage.
Reduced machining time.

Recommendations for use

For accurate contour guidance, copy milling burrs can be used with guide aids.
Observe the recommended rotational speeds.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Countersinking; Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Working on edges (chamfering, rounding); Work on weld seams